The Fuba DAA series is a powerful satellite dish for perfect TV reception. The robust SAT dish can withstand strong winds and heavy rain without any problems and offers excellent satellite reception with a unique bad weather reserve due to its very good quality.
The reflector diameter is 65 centimetres and the support arm is equipped with a special LNB bracket made of robust cast aluminium. All cables can be laid protected by the feed lever. A mounting compartment is built into the back of the SAT antenna, which can accommodate up to 4 DiSEqC relays or band switches.
The entire signal distribution from 2 satellite positions to up to 4 connections can thus be accommodated directly in the antenna. For easier and faster installation, the mast mount and back section are pre-assembled at the factory.
Technical data:
- Reflector diameter: 600 x 650 mm
- Frequency range: 10.75 GHz...12.75 GHz
- Gain: 35.20 dB...36.70 dB
- Half-width at 12.75 GHz: < 2.7
- Cross-polarisation decoupling: ≥ 27 dB
- Offset angle: 22.1
- Wind load at max. 20 m/s: 14.2 kg
- Wind load at max. 40 m/s: 52.4 kg
- Wind load at max. 60 m/s: 119.3 kg
- Elevation adjustment: 0°...73° (0°...41° with foremast mounting)
- Clamping range of mast clamp: 26...75 mm
- Reflector material: Aluminium
- Reflector material thickness: 0.8 mm
- Antenna back: galvanised steel with plastic connections
- Screw sets: Stainless steel
- Colour of back: grey, independent of reflector colour
- Feed mount: 40 mm
- LNB holder: die-cast aluminium
- Weight: 5,28 kg
Scope of delivery:
- 1 x Satellite dish Fuba DAA 650 - 65cm WHITE
- 1 x arm
- 1 x LNB bracket
* The illustrated mounting tube is not included in the scope of delivery.
The Fuba DAA series is a powerful satellite dish for perfect TV reception. The robust SAT dish can withstand strong winds and heavy rain without any problems and offers excellent satellite reception with a unique bad weather reserve due to its very good quality.
The reflector diameter is 65 centimetres and the support arm is equipped with a special LNB bracket made of robust cast aluminium. All cables can be laid protected by the feed lever. A mounting compartment is built into the back of the SAT antenna, which can accommodate up to 4 DiSEqC relays or band switches.
The entire signal distribution from 2 satellite positions to up to 4 connections can thus be accommodated directly in the antenna. For easier and faster installation, the mast mount and back section are pre-assembled at the factory.
Technical data:
- Reflector diameter: 600 x 650 mm
- Frequency range: 10.75 GHz...12.75 GHz
- Gain: 35.20 dB...36.70 dB
- Half-width at 12.75 GHz: < 2.7
- Cross-polarisation decoupling: ≥ 27 dB
- Offset angle: 22.1
- Wind load at max. 20 m/s: 14.2 kg
- Wind load at max. 40 m/s: 52.4 kg
- Wind load at max. 60 m/s: 119.3 kg
- Elevation adjustment: 0°...73° (0°...41° with foremast mounting)
- Clamping range of mast clamp: 26...75 mm
- Reflector material: Aluminium
- Reflector material thickness: 0.8 mm
- Antenna back: galvanised steel with plastic connections
- Screw sets: Stainless steel
- Colour of back: grey, independent of reflector colour
- Feed mount: 40 mm
- LNB holder: die-cast aluminium
- Weight: 5,28 kg
Scope of delivery:
- 1 x Satellite dish Fuba DAA 650 - 65cm WHITE
- 1 x arm
- 1 x LNB bracket
* The illustrated mounting tube is not included in the scope of delivery.