Satellite dish Fuba DAA 850 - 85cm
The Fuba DAA series is a powerful satellite dish for perfect TV reception. The robust SAT dish can withstand strong winds and heavy rain without any problems and offers excellent satellite reception with a unique bad weather reserve due to its very good quality.
The reflector diameter is 85 centimetres and the support arm is equipped with a special LNB bracket made of robust cast aluminium. All cables can be laid protected by the feed lever. A mounting compartment is built into the back of the SAT antenna, which can accommodate up to 4 DiSEqC relays or band switches.
The entire signal distribution from 2 satellite positions to up to 4 connections can thus be accommodated directly in the antenna. For easier and faster installation, the mast mount and back section are pre-assembled at the factory.
Technical data:
- Reflector diameter: 850 x 850 mm
- Frequency range: 10.75 GHz...12.75 GHz
- Gain: 38.12 dB...39.53 dB
- Half-width at 12.75 GHz: < 2.2°.
- Cross-polarisation decoupling: ≥ 27 dB
- Offset angle: 21.5
- Wind load at max. 20 m/s: 21.3 kg
- Wind load at max. 40 m/s: 85.4 kg
- Wind load at max. 60 m/s: 192.1 kg
- Elevation adjustment: 0°...90° (0°...42° for foremast mounting)
- Clamping range of mast clamp: 26...75 mm
- Reflector material: Aluminium
- Reflector material thickness: 1.1 mm
- Antenna back: Galvanised steel with plastic connections
- Screw sets: Stainless steel
- Colour of back: grey, independent of reflector colour
- Feed mount: 40 mm
- LNB holder: die-cast aluminium
LNB Octo Fuba DEK 817
The Fuba DEK 817 is an Octo LNB, which is designed for the direct connection of 8 participants or 8 receivers to a satellite reception system. By using high-quality housing materials, the DEK 817 guarantees optimum mobile radio shielding, which, especially in combination with a Fuba parabolic antenna, enables excellent and interference-free reception quality with minimal noise.
Of course, the DEK 817 is suitable for reception in HDTV, 4K or 3D.
Technical data:
- Input frequency range: 10.70 - 11.70 GHz / 11.70 - 12.75 GHz
- Output frequency range: 950 - 1950 MHz / 1100 - 2150 MHz
- Cross-polarisation decoupling: min. 16 dB
- Version: Universal LNB
- LO frequency: 9.75 GHZ / 10.6 GHz
- LO stability: ± 1.0 MHz at -30°...+60° C
- Phase noise: - 60 dBc @ 1 KHz offset
- Outputs: 8
- Feedhorn: 40 mm
- Conversion gain: max. 52 dB / min. 50 dB
- Power supply: 9.5V...19 V
- Current consumption: typ. 180 mA
- Operating temperature -30...+ 60 °C
- Weight 320g
Scope of delivery:
- 1 x Satellite dish Fuba DAA 850 white
- 1 x Satellite dish bracket
- 1 x LNB Fuba DEK 817 Octo
- 1 x LNB feed holder 40 cm
- 16 x F-plug gold plated
* The pictured mounting tube is not included in the scope of delivery
Satellite dish Fuba DAA 850 - 85cm
The Fuba DAA series is a powerful satellite dish for perfect TV reception. The robust SAT dish can withstand strong winds and heavy rain without any problems and offers excellent satellite reception with a unique bad weather reserve due to its very good quality.
The reflector diameter is 85 centimetres and the support arm is equipped with a special LNB bracket made of robust cast aluminium. All cables can be laid protected by the feed lever. A mounting compartment is built into the back of the SAT antenna, which can accommodate up to 4 DiSEqC relays or band switches.
The entire signal distribution from 2 satellite positions to up to 4 connections can thus be accommodated directly in the antenna. For easier and faster installation, the mast mount and back section are pre-assembled at the factory.
Technical data:
- Reflector diameter: 850 x 850 mm
- Frequency range: 10.75 GHz...12.75 GHz
- Gain: 38.12 dB...39.53 dB
- Half-width at 12.75 GHz: < 2.2°.
- Cross-polarisation decoupling: ≥ 27 dB
- Offset angle: 21.5
- Wind load at max. 20 m/s: 21.3 kg
- Wind load at max. 40 m/s: 85.4 kg
- Wind load at max. 60 m/s: 192.1 kg
- Elevation adjustment: 0°...90° (0°...42° for foremast mounting)
- Clamping range of mast clamp: 26...75 mm
- Reflector material: Aluminium
- Reflector material thickness: 1.1 mm
- Antenna back: Galvanised steel with plastic connections
- Screw sets: Stainless steel
- Colour of back: grey, independent of reflector colour
- Feed mount: 40 mm
- LNB holder: die-cast aluminium
LNB Octo Fuba DEK 817
The Fuba DEK 817 is an Octo LNB, which is designed for the direct connection of 8 participants or 8 receivers to a satellite reception system. By using high-quality housing materials, the DEK 817 guarantees optimum mobile radio shielding, which, especially in combination with a Fuba parabolic antenna, enables excellent and interference-free reception quality with minimal noise.
Of course, the DEK 817 is suitable for reception in HDTV, 4K or 3D.
Technical data:
- Input frequency range: 10.70 - 11.70 GHz / 11.70 - 12.75 GHz
- Output frequency range: 950 - 1950 MHz / 1100 - 2150 MHz
- Cross-polarisation decoupling: min. 16 dB
- Version: Universal LNB
- LO frequency: 9.75 GHZ / 10.6 GHz
- LO stability: ± 1.0 MHz at -30°...+60° C
- Phase noise: - 60 dBc @ 1 KHz offset
- Outputs: 8
- Feedhorn: 40 mm
- Conversion gain: max. 52 dB / min. 50 dB
- Power supply: 9.5V...19 V
- Current consumption: typ. 180 mA
- Operating temperature -30...+ 60 °C
- Weight 320g
Scope of delivery:
- 1 x Satellite dish Fuba DAA 850 white
- 1 x Satellite dish bracket
- 1 x LNB Fuba DEK 817 Octo
- 1 x LNB feed holder 40 cm
- 16 x F-plug gold plated
* The pictured mounting tube is not included in the scope of delivery